IDEC

Switches & Pilot Devices

From miniature pilot lights and industrial switches that mount into 8mm panel cut outs through full size industrial switches that mount into 30mm cutouts, we have an industrial switch or indicator for almost any application. Terminations include solder / quick connect terminals, screw terminals, or PC board pins for direct board mounting. Miniature models use snap action gold plated contacts for superior low level switching, whereas larger models use slow-make, double break contacts for switching heavier loads, up to 10A. Many models offer the flexibility of modular construction, which allows you to change contacts, lamp voltages or button colors easily.


8MM

a8 ap  

  • Choice of round, square or rectangular bezels
  • 8mm round mounting hole
  • Gold-clad silver snap action contacts for reliable low-level switching
  • LED illumination

  • Miniature pilot lights
  • 8mm, 10mm, 12mm, and 16mm round panel cutouts
  • Super bright LEDs
  • Built-in current-limiting resistor and reverse polarity protection diode
  • Dome or flat lenses

 

16MM

ln ap

  • Wide range of switches and pilot lights
  • Sleek flush mount design
  • Standard bezel with 16mm hole size also available
  • Bright LED illumination
  • Flush Mount: Just 34.9mm depth behind the panel

  • Super bright LED Illumination
  • Momentary, Maintained, Selector, Key, Pilot Light and Push-Lock/Turn-Reset Functions
  • Gold-clad silver snap acting contacts for reliable low level switching

  • 16mm round mounting hole
  • Miniature pilot lights
  • Super bright LEDs
  • Built-in current-limiting resistor and reverse polarity protection diode
  • Dome or flat lenses
ln ln ln

  • 5/8” (16mm) mounting holes
  • Locking lever removable contact blocks
  • Solder terminal or PCB terminal options
  • Available assembled or as sub-components
  • Worldwide approvals
  • Incandescent or LED illumination

  • Smooth button resists dirt buildup, and provides attractive appearance
  • Only 23.9mm depth behind the panel
  • IDEC's innovative "safe break action" ensures all NC contacts open if the contact block is separated from the operator
  • Pushlock turn reset and push-pull functions built into same unit

  • IDEC's innovative "safe break action" ensures all NC contacts open if the contact block is separated from the operator
  • Pushlock turn reset and push-pull functions built into same unit
  • Direct opening action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K)

22MM

hw cw tw

  • Widest variety of switches and pilot devices
  • Finger safe (IP20) screw terminals standard, other terminal styles available
  • All E-Stops meet EN418 (IEC compliant, positive action)
  • UL listed, CSA certified, TUV approved, and CE marked

  • ø22.3mm mounting hole compliant with IEC 60947-5-1
  • 3.5-mm operator travel for pushbuttons ensures comfortable and reliable operation
  • Black and metallic bezels available
  • Illuminated pushbuttons, pushbuttons, pilot lights, selector switches and key selector switches are available

  • Corrosion resistant octagonal chrome plated locking bezel
  • Snap on 10A contacts
  • Modular contruction for maximum flexibility
ap LW LW

  • Ultra-bright, sunlight viewable LED pilot lights
  • Dome lens with side visibility up to 100x standard pilot lights
  • Unibody design
  •  ø22.3mm mounting hole compliant with IEC 60947-5-1

  • Light spring action prevents operator fatigue
  • Pure silver or gold plated contacts
  • PCB pin, .110" solder-tab / quick-connect, or screw terminals


  • Light spring action prevents operator fatigue
  • Pure silver or gold plated contacts
  • PCB pin, .110" solder-tab / quick-connect, or screw terminals

30MM

twtd arn cs

  • Rugged design includes chrome plated steel locking ring and die-cast zinc threaded body
  • Super bright LED or incandescent illumination
  • Modular construction for maximum flexibility (up to 6 contacts per switch)

  • Available in plastic bezel, metallic padlock, flush bezel
  • Only 47.7mm depth behind the panel for up to 4 contacts (XN1E)
  • Unique “Safe Break Action”
  • Direct Opening Action (IEC60947-5-5, 5.2, IEC60947-5-1, Annex-K)
  • Safety Lock mechanism (IEC60947-5-5, 6.2)

  • Custom made Cam Switches
  • Available up to 12 positions, with 20 contacts
  • Ideal for ammeter/voltmeter applications
  • Built to order, almost any contact configuration is possible
  • Many handle styles, including key operated
arn    

  • Mono-lever Switches
  • Up to four positions
  • Maintained or spring return in any combination
  • 3 styles including an interlocking lever
  • Contacts rated for 10A / 600V
  • UL Listed, CSA Certified
   

Enclosure

   
fb estop  

  • Three compact sizes (mm): 76 x 76, 140 x 76 and 200 x 76
  • Available in 1, 2, 3, 4 or 5 mounting hole configurations
  • Easy installation: panel, wall or frame mountable
  • Polycarbonate enclosure cover and base, stainless steel screws

  • Up to 4NC contact configurations
  • 29, 40 and 60mm mushroom heads
  • Illuminated E-Stop stations (24V AC/DC)
  • Push-lock turn, Push-pull and Push-lock key reset operators
  • Polycarbonate enclosure cover and base, stainless steel screws
  • IP65, NEMA Type 4X rated
 

Flush Mount Switches

   
lw cw ln

  • Projects only 2mm from front of the panel
  • PCB, Solder Tab and Screw terminals available
  • Metal or Plastic Bezels
  • Gold (gold-clad silver) or Silver contacts

  • ø22.3mm mounting hole compliant with IEC 60947-5-1
  • 3.5-mm operator travel for pushbuttons ensures comfortable and reliable operation
  • Black and metallic bezels available
  • Illuminated pushbuttons, pushbuttons, pilot lights, selector switches and key selector switches are available

  • Wide range of switches and pilot lights
  • Sleek flush mount design
  • Standard bezel with 16mm hole size also available
  • Bright LED illumination
  • Flush Mount: Just 34.9mm depth behind the panel