HomeSmartAXIS Controllers

Our newest micro PLCs tailored for low I/O controls but packed with abundant features.

FT1A-Touch, How to make buttons invisible Messages in this topic - RSS

PaulieT
PaulieT
Posts: 8

1/9/2019
Hi Group,

How can I make buttons invisible on the FT1A-Touch depending on the state of an Internal relay?

I have an internal relay called Run_Mode and I want an HMI button to be visible only when Run_Mode is Reset (=0).
I can make the button inactive depending on the state of Run-Mode, but I would like it to be invisible.

Thanks for the help.
edited by PaulieT on 1/9/2019
0 link
Stephane
Stephane
Posts: 88

24 days ago
Hi Pauli T
I think that there is no way to make a button invisible with the FT1A-Touch.
I do the next workaround.

In the Project Settings I activate to Use System Area.


Here I use D500.
When you write the screennumber in D500, the screen with this value will be displayed.
So, you never use go to screen button, but a word button with the value of the screen.
Result is the same.

In your case, depending on an IR, you can display a screen with or without the button you like to show.
Hope this can help.

Stéphane
0 link
PaulieT
PaulieT
Posts: 8

24 days ago
Thanks Stephane,
0 link




Powered by Jitbit Forum 8.2.0.0 © 2006-2013 Jitbit Software