HomeWindLDR

Discussion for our PLC programming software.

USB how to set up? Messages in this topic - RSS

Steve McLaughlin
Steve McLaughlin
Posts: 17

1/18/2019
Windows 10, SmartAxis touch, I cannot communicate with my USB cable. Do i need a driver?
0 link
Mark Paulus
Mark Paulus
Posts: 25

1/18/2019
The Drivers are included when you install Automation Organizer. Are you using WindO/I NV-3 to program the FT1A-Touch?
0 link
Steve McLaughlin
Steve McLaughlin
Posts: 17

1/18/2019
No WindLDR v8
0 link
Steve McLaughlin
Steve McLaughlin
Posts: 17

1/18/2019
trying to get ladder program first
0 link
Mark Paulus
Mark Paulus
Posts: 25

1/18/2019
You have to start the project with WindO/I NV-3. Click this icon to open the ladder. see attached jpeg

Attachments:
screen shot.jpg
0 link
Mark Paulus
Mark Paulus
Posts: 25

1/18/2019
Yes it's kind of weird but you let NV-3 open the ladder editor. You won't be able to connect if you just open any version of WindLDR.
0 link
Mark Paulus
Mark Paulus
Posts: 25

1/18/2019
Did that work for you?
0 link
Steve McLaughlin
Steve McLaughlin
Posts: 17

1/18/2019
I got phone support help to get the NV-3 and ladder open, but still no usb connection....
0 link
Steve McLaughlin
Steve McLaughlin
Posts: 17

1/18/2019
the PLC is not responding, check cable, etc....
0 link
Steve McLaughlin
Steve McLaughlin
Posts: 17

1/18/2019
back on with phone support no luck
0 link
Steve McLaughlin
Steve McLaughlin
Posts: 17

1/18/2019
we had to reset the plc - hold down upper left on power up, wait for second beep, press the screen 5 times and the plc will reset
0 link
Huntxtrm
Huntxtrm
Posts: 98

5/12/2019
did you get it to work for you? I sometimes have to go into device manager, then to ports, then click the view tab at top of the window, choose "show hidden devices", then delete all that is greyed out from the list. My pc seems to stack up port for IDEC software? They conflict, then don't communicate. Once I delete the hidden ports, and plug back in to the plc, it communicates.
0 link
Huntxtrm
Huntxtrm
Posts: 98

5/12/2019
Old post, sorry. LOL, just trying to help.
0 link




Powered by Jitbit Forum 8.2.0.0 © 2006-2013 Jitbit Software