HomeHG1G/2G/3G/4G

4.3" to 12.1" Operator Interface with all the advance functions.

How to transfer a program from USB/SD to HMI Messages in this topic - RSS

lindahtay
lindahtay
Administrator
Posts: 106

20 days ago
Application Note - How to transfer a HMI program from USB/SD

0 link
patco901
patco901
Posts: 1

7 days ago
I need to be able to view and operate my hmi via the internet. I would like for it to look identical to the hmi screens. How would I do this?
0 link
Shane
Shane
Moderator
Posts: 334

7 days ago
If you are using an HMI with the integrated web server all you have to do is go to the project configuration -> web server and be sure to check the "Use System Web Page" and select "Enable Remote Control and Monitor".

Then on your network in your router you must port forward port 80, or whatever port you set it to, to the IP address of your HMI. Then you navigate your web browser to your public IP address and your router will direct it to the HMI. It works best if your facility has a static IP so it's not always changing. You can use a dynamic DNS service if you don't have a static IP but now we're getting pretty deep in networking stuff...
+1 link




Powered by Jitbit Forum 8.2.0.0 © 2006-2013 Jitbit Software