HomeWindLDR

Discussion for our PLC programming software.

WindLDR PLC Video Tutorial Lessons Messages in this topic - RSS

Don Pham
Don Pham
Administrator
Posts: 399

5/29/2014
Lesson 1: Configure PLC Type and Serial or USB communications for non-Ethernet PLCs




Lesson 2: How to configure Ethernet communications for FC5A-D12% CPU


edited by donp@idec.com on 8/3/2015
edited by donp@idec.com on 8/13/2015
0 link
Don Pham
Don Pham
Administrator
Posts: 399

8/5/2015
Lesson 3: Series, Parallels circuit and NO (normally open)/ NC (normally closed) contacts



edited by donp@idec.com on 8/5/2015
0 link
Don Pham
Don Pham
Administrator
Posts: 399

8/10/2015
Lesson 4: Set, Reset, On-delay Timer, Move and Data comparison


0 link
Don Pham
Don Pham
Administrator
Posts: 399

8/13/2015
Lesson 5: Off Delay and Cycle Timer


0 link
Don Pham
Don Pham
Administrator
Posts: 399

8/21/2015
Lesson 6: Up Counter


0 link
eemakar
eemakar
Posts: 20

7/26/2016
Thanks for the videos! Do you have any examples of de-bounce on an output? Thank you
0 link
Don Pham
Don Pham
Administrator
Posts: 399

7/27/2016
Are you trying to prevent an output turn ON until a condition is stabilize for period of time? If that's the case, just use an ON delay timer.
0 link
ChrisDShaw
ChrisDShaw
Posts: 5

10/9/2016
eemakar wrote:
Thanks for the videos! Do you have any examples of de-bounce on an output? Thank you



To prevent multiple triggers I use a "SOT" (Single Output Transition) linked to a "Set" or "Reset" output. This catches the leading edge of the first pulse then ignores all other input until the output is returned to its original state.
0 link
krystalPeek
krystalPeek
Posts: 4

3/26/2019
I'm looking for sample program, or a tutorial on PID Control. I need to control a 4-2o out based on pressure and I cant find anything on the IDEC PID
0 link
danny
danny
Posts: 7

3/29/2019
Nice Videos Don. Would love to see some more.
0 link
Shane
Shane
Moderator
Posts: 311

4/8/2019
krystalPeek wrote:
I'm looking for sample program, or a tutorial on PID Control. I need to control a 4-2o out based on pressure and I cant find anything on the IDEC PID



I responded to another one of your posts with a sample program that may help. Have a look at it.
0 link
Huntxtrm
Huntxtrm
Posts: 102

4/18/2019
I am interested in this also.
0 link
Woodalje
Woodalje
Posts: 1

14 days ago
Good Morning
I am new to Programming, But Thanks to your Videos I have successfully wrote a basic program for a Water fill System. I am looking for information on using a Analog Input (pressure Switch 0-10 VDC) to CMP>= comparison.
Any help would be greatly appreciated.
0 link




Powered by Jitbit Forum 8.2.0.0 © 2006-2013 Jitbit Software