HR1S Series
HR1S safety control relays are compact units designed to monitor safety input devices, which allow machine operation only when all safety controls are functioning properly and hazardous conditions are not detected. Supported safety devices include E-Stops, interlock switches and non-contact safety switches. These relays have either instantaneous (STOP 0) or time delayed (STOP 1) relay safety outputs, as well as solid-state outputs for use with diagnostics, troubleshooting and correct system operation. In addition, front panel LEDs can be used for monitoring the current status and most models are available in a variety of monitoring configurations, including removable terminals, monitored start, and single- or dual-channel operation.
The HR1S series of safety control relays provide increased functionality when designing equipment to meet global safety requirements in the U.S. and Europe, while adhering to EN ISO 13849-1 PLe, Safety Cat 4 and EN 62061 SIL 3.
The HR1S series of safety control relays provide increased functionality when designing equipment to meet global safety requirements in the U.S. and Europe, while adhering to EN ISO 13849-1 PLe, Safety Cat 4 and EN 62061 SIL 3.
Key Features:
Products (13)
View all
Key Features
view details
downloads
- EN ISO 13849-1 PLe
- Safety Cat 4 compliant and EN 62061 SIL 3
- Removable and fixed terminal models
- LED status indicators
- Finger safe protection
- 35mm-wide DIN rail mounting
- Stop 0 & Stop 1 Categories
- MTTFd (year): up to 210 (depend on the model)
Key Features
view details
downloads
- 1NO-1NC safety input type such as magnetic coded safety switches
- Fault diagnosis function with dual safety circuits
- Internal relay operations can be monitored with an LED indicator
- Finger-safe protection
- 22.5mm wide 35mm DIN rail mounting
- EN ISO 13849-1 PLe Safety Cat 4 and EN 62061 SIL 3
- UL listed, CSA certified, TÜV NORD approved
- MTTFd (year): 83.1
Key Features
view details
downloads
- 2NC safety input type such as E-Stops or Interlock Switches
- EN ISO 13849-1 PLe
- Safety Cat 4 compliant and EN 62061 SIL 3
- Welding detection of start switch
- Fault diagnosis function with dual safety circuits
- Finger-safe protection
- 22.5mm wide 35mm DIN rail mounting
- UL listed, CSA certified, TÜV NORD approved
- MTTFd (year): 243
Key Features
view details
downloads
- ISO 13849-1 Performance Level e
- Safety Category 4 and EN 62061 Safety Integrity Level 3
- Compact design: 45 mm in width
- Time delay outputs: 3NO
- Auxiliary outputs enable monitoring of power safety inputs and a time delay output
- UL Listed, CSA certified, TÜV NORD approved
- MTTFd (year): 134.8 (Stop Cat. 0)
- MTTFd (year): 54.5 (Stop Cat. 1)
Key Features
view details
downloads
- 1NC or 2NC safety input type such as E-Stops or Interlock Switches
- EN ISO 13849-1 PLe
- Safety Cat 3 compliant and EN 62061 SIL 3
- Fault diagnosis function with dual safety circuits
- Finger-safe protection
- 22.5mm wide 35mm DIN rail mounting
- UL listed, CSA certified, TÜV NORD approved
- MTTFd (year): 210.4
Key Features
view details
downloads
- EN ISO 13849-1 PLe
- Safety Cat 4 compliant and EN 62061 SIL 3
- Removable and fixed terminal models
- LED status indicators
- Finger safe protection
- 35mm-wide DIN rail mounting
- Stop 0 & Stop 1 Categories
- MTTFd (year): up to 210 (depend on the model)
Key Features
view details
downloads
- 1NO-1NC safety input type such as magnetic coded safety switches
- Fault diagnosis function with dual safety circuits
- Internal relay operations can be monitored with LED indicator
- Finger-safe protection
- 22.5mm wide 35mm DIN rail mounting
- EN ISO 13849-1 PLe
- Safety Cat 4 and EN 62061 SIL 3
- UL listed, CSA certified, TÜV NORD approved
- MTTFd (year): 83.1
Key Features
view details
downloads
- 1NO-1NC safety input type such as magnetic coded safety switches
- Fault diagnosis function with dual safety circuits
- Internal relay operations can be monitored with LED indicator
- Finger-safe protection
- 22.5mm wide 35mm DIN rail mounting
- EN ISO 13849-1 PLe Safety Cat 4 and EN 62061 SIL 3
- UL listed, CSA certified, TÜV NORD approved
- MTTFd (year): 83.1
Key Features
view details
downloads
- ISO 13849-1 Performance Level e
- Safety Category 4 and EN 62061 Safety Integrity Level 3
- Compact design: 45 mm in width
- Time delay outputs: 3NO
- Auxiliary outputs enable monitoring of power safety inputs and a time delay output
- UL Listed, CSA certified, TÜV NORD approved
- MTTFd (year): 134.8 (Stop Cat. 0)
- MTTFd (year): 54.5 (Stop Cat. 1)
Key Features
view details
downloads
- 2NC safety input type such as E-Stops or Interlock Switches
- EN ISO 13849-1 PLe
- Safety Cat 4 compliant and EN 62061 SIL 3
- Welding detection of start switch
- Fault diagnosis function with dual safety circuits
- Finger-safe protection
- 22.5mm wide 35mm DIN rail mounting
- UL listed, CSA certified, TÜV NORD approved
- MTTFd (year): 243